06 MRT
Main Components
Configuration for the MRT + UTCI analysis. Method: Bourgeois et al. (2008), Building Research & Information 36(1):68-82, doi:10.1080/09613210701446325; Subramaniam (2017), Lawrence Berkeley National Laboratory, tutorial (Nov 2017 revision) Ch. 2, App. B, https://www.radiance-online.org/learning/tutorials/matrix-based-methods.
Predefined multi-layer construction (assembly) for the SurfaceTemp admittance solve.
Thermal + optical material properties for a building/ground MRT surface.
Canopy material properties for an MRT tree surface: optics, and how the crown transmits radiation. Defaults are SOLWEIG's (Lindberg & Grimmond 2011): 3 % of the beam through a crown in leaf (Konarska et al. 2014 measured 1.3-5.3 % in leaf, 40-52 % bare), 50 % out of leaf, leaves at air temperature for longwave. Deciduous crowns follow the SITE's leaf season from the EPW air temperature (ETCCDI growing season, Zhang et al. 2011): bare through the cold spell, in leaf all year where no six-day spell drops below 5 C. A leaf area density switches the in-leaf crown to Beer-Lambert over the path inside CLOSED crown meshes. With Radiance reflections on, the crowns are partially transparent in the Radiance scene too, one scene per leaf state (a Beer-Lambert crown's sky and reflections at its mean-chord transmittance). Method: Zhang et al. (2011), WIREs Climate Change 2(6):851-870, doi:10.1002/wcc.147.
Leaf/canopy material properties for an MRT vegetation surface.
Point-specific statistics (and optionally the raw hours) from a SurfaceTemp Result, without putting the full 8760-hour year on the canvas.
Mean radiant temperature at each sensor, hour by hour. MRT = shortwave + longwave. SHORTWAVE — what the sensor absorbs from sun and sky. Either a direct raycast (default, pure C#) or the Radiance DDS chain (MRT Settings -> Radiance Reflections), which adds diffuse sky and interreflection off the surroundings. Radiance returns annual total and direct illuminance per sensor, which are mapped onto the probes' shortwave series. LONGWAVE — what the sensor exchanges with everything around it, weighted by view factors traced from each sensor against the scene and the sky dome. SURFACE TEMPERATURES come from ENERGYPLUS, not Radiance — Radiance is a light transport engine and computes no temperatures at all. With MRT Settings -> EnergyPlus Surfaces on, Eddy3D builds an epJSON from the polygons that actually matter to the sensors (those inside the cumulative view-factor percentile and above the small-face cutoff; everything else is demoted to a shading surface), runs EnergyPlus against the EPW, and maps the surface-specific temperatures out of the ESO back onto the geometry. With it off, every surrounding surface is simply assumed to sit at air temperature. SKY TEMPERATURE is always Clark-Allen from dew point, dry bulb, opaque cloud cover and relative humidity — it needs no engine. Method: Dogan, Kastner & Mermelstein (2021), Building and Environment 196:107762, doi:10.1016/j.buildenv.2021.107762; Kastner & Dogan (2022), Building and Environment 212:108639, doi:10.1016/j.buildenv.2021.108639.
Create comfort sensor probes from meshes (one probe per face center, facing the face normal) and/or points (facing corresponding Normals), mixed freely on one input.
Tags Breps or Meshes as a radiation surface for an MRT analysis. Breps are meshed at Patch Size; Meshes are used face-for-face as given. Tree surfaces are tree CROWNS that transmit part of the radiation (SOLWEIG canopy, Lindberg & Grimmond 2011: 3 % of the beam in leaf, 50 % out of leaf, leaf season from the site latitude, leaves at air temperature for longwave) unless Tree Settings says otherwise; model them as closed crown volumes. Documents saved before canopy transmittance keep their opaque crowns (right-click).
Computes the Sky View Factor (SVF) for each input point using the Tregenza 145-patch sky subdivision. Casts 145 rays toward the upper hemisphere and returns the fraction of unobstructed sky directions (0 = fully obstructed, 1 = fully open sky).
Solves outdoor surface temperature per analysis point via the frequency-domain admittance method (no thermal mesh, no warm-up). Feeds a future MRT component alongside Sky Exposure. Method: Beckett, O., Owens, S. and Acred, A. (2026). Applying Frequency Domain Methods for Calculating Outdoor Surface Temperatures. Proceedings of the 12th National Conference of IBPSA-USA, Minneapolis, MN. https://publications.ibpsa.org/conference/paper/?id=simbuild2026_1312
Solves MRT on a prepared VF Model: shortwave (direct raycast, or Radiance DDS when MRT Settings enables reflections) + view-factor longwave. Wire the VF Model straight from MRT View Factors for ambient/FFT surface temperatures, or through SurfaceTemp (EnergyPlus) for E+ temperatures. Result feeds Deconstruct MRT and UTCI. Method: Dogan, Kastner & Mermelstein (2021), Building and Environment 196:107762, doi:10.1016/j.buildenv.2021.107762; Kastner & Dogan (2022), Building and Environment 212:108639, doi:10.1016/j.buildenv.2021.108639.
Assembles tagged surfaces + sensors into a radiation model, builds the sky dome, and solves probe-to-polygon view factors. Feed the VF Model to SurfaceTemp (EnergyPlus) and/or MRT Solve. The sweep is the expensive part of an MRT run — solving it once here lets the downstream stages re-run without repeating it. Method: Dogan, Kastner & Mermelstein (2021), Building and Environment 196:107762, doi:10.1016/j.buildenv.2021.107762.
Surface temperatures via EnergyPlus, mapped onto a solved VF Model. The counterpart of the FFT SurfaceTemp component for the staged MRT pipeline: it consumes MRT View Factors' output (the E+ surface selection depends on the view factors) and its output feeds MRT Solve. Skipping this stage leaves surfaces at ambient temperature unless they carry FFT temperatures from MRT Surface. Method: Dogan, Kastner & Mermelstein (2021), Building and Environment 196:107762, doi:10.1016/j.buildenv.2021.107762.
Probe-specific statistics (and optionally the raw hours) from an MRT Result, without putting the full 8760-hour year on the canvas.
Colors the model's surfaces by view factor: the mean each face receives from all sensors, or one chosen sensor's view factors to every face. Values output is per face, in mesh face order, for custom gradients.
Equal-angle fisheye of the hemisphere above one sensor, as a colored mesh — a flat disk or a 3D dome (Display dropdown): sky, building, ground and vegetation per direction, plus the sensor's cosine-weighted sky view fraction.