Skip to content

Mesh Settings - [source code]

Configure mesh refinement, layers, and grading for Eddy3D.

Input

Name Nickname Description Type
Refinement Box Level RefLvl Refinement level inside the refinement box (higher is finer). Optional; default is 2. Integer
Building Surface Level BldgLvl Refinement level for building surfaces. Optional; default is 2. Integer
Building Feature Level FeatLvl Refinement level for building edges and corners. Optional; default is 2. Integer
Ground Surface Level GroundLvl Refinement level for ground/terrain surfaces. Optional; default is 2. Integer
Layer Count Layers Number of prism layers to add. Optional; default is 4. Integer
Add Layers AddLayers Enable prism layer addition. Optional; default is false. Boolean
Snap Snap the castellated mesh to the input geometry surfaces. Default is true (snapping on). Boolean
Grading Strength (Horizontal) GradXY Adaptive grading strength in X/Y: 1 = uniform, up to 10 = cells concentrate hard over the building and coarsen toward the domain edges. Number
Grading Strength (Vertical) GradZ Adaptive grading strength in Z: 1 = uniform, up to 10 = cells concentrate over the building height and coarsen aloft. Number
Adaptive Grading Adaptive Enable adaptive grading near buildings. Optional; default is true. Boolean
Cells Between Levels nCells snappyHexMesh nCellsBetweenLevels: how many buffer cells separate two refinement levels. Higher is a gentler transition (and more cells). Optional; -1 keeps the existing behaviour — 8 when Add Layers is on, otherwise the template's 4. Integer

Output

Name Nickname Description Type
Mesh Settings MeshSet Mesh settings for snappyHexMesh and blockMesh. Generic Data