Skip to content

Simulation Settings - [source code]

Configure simulation control settings for UMF. OutdoorPlus

Input

Name Nickname Description Type
Write Interval WriteInt Write interval in time steps. Optional; uses solver default if omitted. Integer
Write Format Format Write format: 'ascii', 'binary', or 'compressed'. Text
CPU Count CPU Number of CPUs/subdomains to use. -1 = auto: sized from the air mesh when one exists (50k cells per core), else physical cores minus two. Optional; default is 1. Integer
Initial Solid Time Step Factor SolidStep Initial solid time step factor for UMF controlDict. Optional. Number
Min Delta T MinDT Minimum time step between iterations. Optional. Number
Max Delta T MaxDT Maximum time step between iterations. Optional. Number
Min Fluid Iterations MinFI Minimum fluid iterations per hourly step before the residual controls may end it. Template default 200: the bulk field of a warm-started hour is stationary by ~150-200 iterations. Optional. Number
Max Fluid Iterations MaxFI Maximum fluid iterations per hourly step (template default 1000). The residual controls normally end a warm-started hour at ~200-300 iterations; the first, cold-started hour needs ~350-500. Optional. Number
PC Equation Form PcForm 'pc-based' or 'mixed' (default is pc-based). Text
Damping Thickness DampThk Blending layer damping thickness [m] from the lateral boundaries. Written to the blendingCoeffs block of system/controlDict, which urbanMicroclimateFoam reads only when controlDict 'blending' is true. The case keeps it off (the blending layer looks up patches west/east/north/south; this case's are front/back/left/right), so the value has no effect. Optional. Number
Alpha Coeff U AlphaU Blending layer strength for velocity U (alphaCoeffU). Written to the blendingCoeffs block of system/controlDict, which urbanMicroclimateFoam reads only when controlDict 'blending' is true. The case keeps it off (the blending layer looks up patches west/east/north/south; this case's are front/back/left/right), so the value has no effect. Optional. Number
Alpha Coeff T AlphaT Blending layer strength for temperature T (alphaCoeffT). Written to the blendingCoeffs block of system/controlDict, which urbanMicroclimateFoam reads only when controlDict 'blending' is true. The case keeps it off (the blending layer looks up patches west/east/north/south; this case's are front/back/left/right), so the value has no effect. Optional. Number

Output

Name Nickname Description Type
Simulation Settings SimSettings Simulation control settings. Generic Data