Compute annual probe-specific UTCI from simulation outputs: MRT and wind-speed data trees, plus air temperature and relative humidity. For a weather-only calculator, use "UTCI (Weather)".
Input
Name
Nickname
Description
Type
MRT
M
The MRT component's Result (preferred), or a DataTree of annual MRT values — {probe}(8760) or {hour}(probes), both accepted.
Generic Data
Wind Speed
V
Wind speed as an AnnualWindField (the VAF component's Wind Speed output — fed by CFD probe vectors or the ML Wind Predictor alike), one spatial list (one value per probe, held for all hours), or a {probe}(hours) / {hour}(probes) tree. An AnnualWindField on a different grid than the MRT sensors is resampled by nearest neighbor when both carry points. Pedestrian-height speeds are lifted to the 10 m UTCI reference. Defaults to calm (0.5 m/s) when unconnected.
Generic Data
Air Temperature
T
Annual hourly ambient air temperature (8760 values, °C).
Number
Relative Humidity
RH
Annual hourly relative humidity (8760 values, %).
Number
Transpose
Orientation of the UTCI tree output. Hours × Probes (default): one branch per hour, each holding every probe's value. Probes × Hours: one branch per probe, each holding that probe's year.
Text
Run
R
Enable UTCI calculation.
Boolean
Output
Name
Nickname
Description
Type
UTCI
U
UTCI data tree. Default: {hour}(probes). With Transpose off: {probe}(hours). Only built while this output is WIRED: for a few thousand probes the full year is tens of millions of values on the canvas, and constructing them — not the UTCI math — is the wait. Prefer the Result output with Deconstruct UTCI.
Number
Comfort Hours
H
No-thermal-stress hours per probe.
Integer
Comfort %
%
Comfort percentage per probe.
Number
Result
The complete annual UTCI solve as ONE item — feed to Deconstruct UTCI for statistics, comfort maps and hour selections without materializing the year as a tree. Carries the MRT probes' positions when the MRT input was a Result.